Publicidad
8
DRC
Dynamic Range Control (DRC) is used for automatically normalising
volume, making quieter sounds louder and louder sounds quieter.
Long press
to set the DRC.
DRC OFF
DRC AUTO
DRC ON
Bluetooth operation
Pair Bluetooth-enabled devices.
The fi rst time you connect your Bluetooth device to this player, you need
to pair your device to this player.
NOTE:
– Compatibility with all Bluetooth devices is not guaranteed.
– Any obstacle between this unit and a Bluetooth device can reduce the
operational range.
– If the signal strength is weak, your Bluetooth receiver may disconnect, but
it will re-enter pairing mode automatically.
1. Select the Bluetooth input
2. Long press (3 seconds) the
button on the soundbar or the INPUT
on the remote control to start the pairing process. The Bluetooth
input LED will fl ash.
3. Activate your Bluetooth device and select the search mode.
"SHARP HT-SB700" will appear on your Bluetooth device list.
4. Select "Sharp HT-SB700" from the list of devices. The Bluetooth input
LED will be solid.
5. Begin playing music from the connected Bluetooth device.
• To pause/resume play, press
the soundbar.
• To skip to a track, press
/
• Long press
/
to fast rewind/fast forward.
Troubleshooting
Perform a factory reset
To perform a factory reset, press and hold the
soundbar for 10 seconds. When complete, the soundbar will go into
standby (LED's off ).
No power
Ensure that the power adapter is properly connected.
Ensure that there is power at the AC outlet.
Press standby button on the remote control or soundbar to turn the
soundbar ON.
No sound
For HDMI eARC/ARC to work, ensure you are using HDMI version 2.0 or
higher.
Increase the volume. Press
on the remote control or on the soundbar.
Press
on the remote control to ensure the soundbar is not muted.
Press INPUT to select a diff erent input source.
When connected to a digital source (HDMI or Optical), if there is no
audio:
• Try setting the TV output to PCM or your TV may be set to variable
audio output. Confi rm that the audio output setting is set to FIXED
on the remote control or the
on
buttons on the remote control.
and INPUT on the
or STANDARD, not VARIABLE. Consult your TV's user manual for more
detailed information.
If using Bluetooth, ensure that the volume on your source device is
turned up and that the device is not muted.
Remote control does not work
Before you press any playback control button, fi rst select the correct
source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.
I hear buzzing or humming
Ensure all cables and wires are securely connected.
Connect a diff erent source device to see if the buzzing persists. If it does
not, the problem may be with the original device.
Connect your device to a diff erent input on the soundbar.
I can't fi nd the Bluetooth name of this unit on my Bluetooth device
Ensure the Bluetooth function is activated on your Bluetooth device.
Re-pair the unit with your Bluetooth device.
This device is set to standby after 20 minutes of no source signal.
When the unit's external input signal level is too low, the unit will be
turned off automatically in 20 minutes. Please increase the volume level
of your external device. This feature is a requirement of ERPII and is
designed to save energy when the unit is not in use.
Publicidad
