Publicidad
Idiomas disponibles
Idiomas disponibles
AXF-240
AMPLIFIER
3. FRONTAL PANEL
1. LED PROT indicator.
It lights in red once the amplifier comes into protection status.
2. LED CLIP indicator.
It lights yellow when the output level is too high.
3. LED -10 dB indicator.
It lights green when the output audio level reaches -10 dB.
4. LED SIGNAL indicator.
It lights green when there is audio at the output of the amplifier.
5. LED POWER indicator.
It lights blue when 110~230 Vac is available and power is on.
6. MIC1 / MIC2 / MIC3 / MIC 4 / MIC5 level controls.
These controls allow to modify the volume of the microphone audio inputs.
7. AUX1 / AUX2 level controls.
These controls allow to modify the volume of the aux audio inputs.
8. BASS level control.
9. TREBLE level control.
10. MASTER volume control.
General volume control, it affects all inputs except the EMG one.
11. POWER switch.
Turn on and off the device.
AXF-240_Manual_ENG_V1.0
Page 4 of 16
Publicidad
