AKASO BRAVE 7 Manual De Instrucciones página 18

EN
4.3 Detach the Camera Frame from the Packing Box
First, turn the screw rod counterclockwise, using your hand or the included spanner.
After removing the rod, take the camera frame out of the box. Then, remove the silicon
gel from the camera frame. Finally, lift the mount buckle and slide it back to release it
from its position.
Unscrew the screw rod
1
Peel off the silicon gel
3
4.4 Charge the Battery Separately
Connect the battery charger to a USB outlet, then insert the battery.
Note:
The battery charger indicator will appear red while charging and blue when
fully charged.
① Loosen the rod by rotating
it clockwise
② Tighten by rotating it
counterclockwise
Orient the spanner with
the pattern facing outward
2
Lift the mount buckle upwards
4
16
Remove the screw rod from its position
and take out the camera frame
Push it backwards
5