Menu System; Selecting The Cell-Phone You Wish To Connect; Deleting A Registered Cell-Phone; Displaying The Cell-Phone Status - Kenwood KCA-BT100 Manual De Instrucciones

Menu System

(For Audio receiver)
Menu System
Set up various functions. The Menu system basic
operation method is explained here. The reference
for the Menu items and their setting content is after
this operation explanation.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Push the Control knob towards [FM] or [AM].
3
Set the menu item
Push the Control knob towards [4] or [¢].
4
Exit Menu mode
Press the [MENU] button.
• Three menu items appear on the display. The menu item
displayed at the center is the one you can adjust.
In Standby mode
Selecting the Cell-Phone You Wish to
Connect
When two ore more cell-phones have already been
registered, you need to select the cell-phone you
wish to use.
1
Select the phone selection mode
Push the Control knob towards [FM] or [AM].
Select the "Phone Selection" or "PHN-SEL" display.
2
Enter the selected phone selection mode
Press the Control knob ([38]) for at least 1
second.
"(name)" is displayed.
3
Select the cell-phone you wish to connect
Push the Control knob towards [FM] or [AM].
4
Set up the cell-phone you wish to connect
Push the Control knob towards [4] or [¢].
"✱(name)" or "-(name)" is displayed.
"✱" (dark color) or "✱": The selected cell-phone is
busy.
"✱" (light color) or "_": The selected cell-phone is
on standby.
5
Exit the phone selection mode
Press the [MENU] button.
10
|
English
In Standby mode

Deleting a Registered Cell-Phone

You can delete a registered cell-phone.
1
Select the phone deletion mode
Push the Control knob towards [FM] or [AM].
Select the "Phone Delete" or "PHN-DEL" display.
2
Enter the phone deletion mode
Press the Control knob ([38]) for at least 1
second.
"(name)" is displayed.
3
Select the cell-phone you wish to delete
Push the Control knob towards [FM] or [AM].
4
Delete the selected cell-phone
Press the Control knob ([38]) for at least 1
second.
"Delete" or "DELETE" is displayed.
5
Exit the phone deletion mode
Press the [MENU] button.
• When a registered cell-phone is deleted, its Phone Book,
list of outgoing calls, and list of incoming calls are also
deleted.

Displaying the Cell-Phone Status

You can display the connection status, signal
strength, and battery level.
1
Select the status display item
Push the Control knob towards [FM] or [AM].
Select the "P-STATUS" display.
2
Enter the status display mode
Press the Control knob ([38]) for at least 1
second.
3
Select the item you wish to display
Push the Control knob towards [FM] or [AM].
4
Exit the status display mode
Press the [MENU] button.