Dialing Method; Selecting The Dialing Mode; Dialing By Using The Quick Dialing Function - Kenwood KCA-BT100 Manual De Instrucciones

Dialing Method

Selecting the Dialing Mode

You can dial in five different ways.
1
Enter the dialing method selection mode
Press the [ATT] button for at least 1 second.
"DIAL" or "N-DIAL" is displayed.
2
Select a dialing method
Press the Control knob ([38]).
Pressing this knob toggles between the following
dialing methods:
For the Audio receiver with Multi-function Key System:
1 Press the [NEXT] button.
Select the key function section.
2 Press the [1] ("DIAL") – [4] ("IN-C") button.
Display Multi key
"DIAL"/ [1] ("DIAL") Dial by entering a phone number.
"N-DIAL"
"INITIAL"/ [2]
"PH-BOOK1" ("PHBK")*
"PH.BOOK"/ [2]
"PH-BOOK2" ("PHBK")*
"OUT"/ [3] ("OUT-C") Dial by using the outgoing call list.
"OUT-CALL"
"IN"/ [4] ("IN-C") Dial by using the incoming call list.
"IN-CALL"
3
Exit the dialing method selection mode
Press the [ATT] button for at least 1 second.
• To use the Phone Book, it must have been downloaded
from the cell-phone. For more details, see <Downloading
the Phone Book> (page 5).
• The outgoing call list and the incoming call list are the
lists of calls originated from and received at this unit.
They are not the ones stored in the cell-phone memory.
• * With the Multi-function Key System, pressing the [2]
("PHBK") button switches between the Phone Book
search methods.
Function of remote controller
Making a Call by Entering a Phone
Number
You can make a call by entering a phone number.
1
Enter the number dial mode
Select the "DIAL" or "N-DIAL" display.
Refer to <Selecting the Dialing Mode> (page 7).
(For Audio receiver)
Dialing method
(page 7)
Dial by using the quick dialing function.
(page 7)
Dial by searching for the initial in the
Phone Book (page 8)
Dial by searching the Phone Book in the
alphabetical order. (page 8)
(page 8)
(page 9)
2
Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
3
Make a call
Press the [DIRECT] button on the remote
controller.
"CALL" or "Call" is displayed.
To erase the entered phone number digit by
digit:
Press the [4] button on the remote controller.
• You can input max 32 digits.
• Depending on the type of your control unit, "|" (all
segments are lit) is displayed for #.
Dialing by Using the Quick Dialing
Function
You can dial by calling the phone number
registered to the preset dial number list. For how to
preset a phone number, refer to <Registering to the
Preset Dial Number List> (page 8).
1
Enter the number dialing mode
Select the "DIAL" or "N-DIAL" display.
Refer to <Selecting the Dialing Mode> (page 7).
2
Select the button corresponding to the preset
dial number
Press the [1] – [3] button.
"Preset #" or "PRESET #" is displayed.
For the Audio receiver with Multi-function Key System:
1 Press the [NEXT] button.
Select the key function section.
2 Press the [1] ("1") – [3] ("3") button.
"DIAL #" is displayed.
3
Make a call
Press the Control knob ([38]) for at least 1
second.
"CALL" or "Call" is displayed.
• If the desired number is not registered to the preset dial
number list, "No Name No Number", "No Number", or
"NO-NUMBER" is displayed.
7
|
English