72 | Installation
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Cables with a cross-section between 2.5 mm² and
6 mm² are compatible with the SUNCLIX plugs/
sockets.
The Bosch BPT-S series string inverters are equipped
with varistors on the DC side. These provide
overvoltage protection.
To minimise faults caused by overvoltages through
electric fields (e.g. in the event of storms): Avoid
looping (keep the enclosed area between the feed
and return line as small as possible).
5.12:
Example: Avoid looping (keep the enclosed area
between the feed and return line as small as
possible)
[1]
Area enclosed by cables
Prerequisites
Protective earth connected
Polarity of the solar generator cable checked: DC+
cable for socket (+) and DC– cable for plug (–)
Voltage of the solar generator cable checked
(1)
English
+ -
Bosch Power Tec GmbH