Publicidad
Idiomas disponibles
Idiomas disponibles
See Owner's Manual for complete operating instructions.
PART LIST
Before discarding the packing materials ensure all the parts are accounted for.
Some parts may be attached to the base or inside boxes, please inspect carefully.
Wireless Remote
Control
*attached to the base
AAA Batteries (2)
TBD
Optional Equipment
*Only included in
(not included):
split bases
Connecting Strap*
STEP 1
Always use two people when setting up the base.
Place the bed base box in a desired location with the
bottom of the box facing up. Remove the binding
straps and packing materials, making sure not to
puncture the box with any sharp objects.
STEP 2
Remove the bed base from the
box. Unfold the bed making
sure to keep the bottom of the
bed facing upwards. Remove
all accessories and interior
packaging and identify items
included in parts list above.
STEP 3
If installing a headboard, please see headboard bracket
installation instructions in Owner's Manual on page 18.
To install the legs, check to make
sure all segments are assembled
together tightly. Alternative heights
in 3" increments can be achieved
by removing leg segments from
the top of the leg accessory.
Thread the leg into the frame, and tighten by hand.
Do not over tighten.
BASE SETUP
Mattress
Retainer Bar*
Washers (6)
for shipping
• Surge Protector
• 9V Batteries (2)
Legs &
Power Cord
STEP 4
To sync two bases see detailed installation
instructions on pages 16-17 of the Owner's Manual.
Uncoil input cord (connected
to control box's power port)
and plug into Power Supply.
STEP 5
Uncoil the Power Cord and
connect to the Power Supply.
Place Power Supply on the
ground and extend from the
base. Ensure that the Power
Supply and all attached cords are
directed toward the desired surge
protector.
STEP 6
Carefully flip the base over on to its legs. Important:
Two people are required to move the bed base. Do
not drag across the floor. Do not rest frame on its
side, excessive pressure may damage the legs.
Power
Battery
Supply
Backup Strap
Remote -
Quick Use
Guide
Publicidad
