Using The Menu - Sony VPL-W400Q Manual De Instrucciones

Using the menu

The projector is equipped with an on-screen menu for
making various adjustments and settings.
To select the language used in the menu, see page
27.
1
Press the MENU key.
The menu display appears.
The menu presently selected is highlighted in blue.
V I D E O
V I D E O
INPUT
SELECT
I N P U T - A
MEMORY
SELECT
ASPECT
SELECT
SET
SETTING
INPUT
INFO.
SEL: EXIT: MENU
2
Use the V or v keys on the control panel to select a
menu, then press the b key or the ENTER key. On
the Remote Commander, move the joy stick up or
down to select a menu, then move it to the right or
press the ENTER key.
The selected menu appears.
Menus Setting items
V I D E O
M E M O R Y : 1
INPUT
SELECT
C O N T R A S T 8 0
B R I G H T 5 0
MEMORY
SELECT
C O L O R 5 0
H U E 5 0
ASPECT
SELECT
S H A R P 5 0
D . P I C T U R E : O F F
SET
SETTING
C O L O R T E M P : L O W
SEL: SET: ENTER RESET: RESET
INPUT
INFO.
EXIT: MENU
3
Make setting or adjustment on an item.
For details on setting individual items, see the relevant
menu pages.
20
(EN)
Guide for operation
To clear the menu display
Press the MENU key.
The menu display disappears automatically if no key is
pressed for one minute.
To reset items that have been adjusted
Press the RESET key. "RESET complete!" appears on
the screen and the settings appearing on the screen will
be reset to their factory preset values.
About the memory of the settings
The settings are automatically stored in the projector
memory.