Technical Specifications - Hudora Laufrad Bikey Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the packaging
carefully in case questions arise in the future. Please always include these
instructions when giving the product to a third party. This product must be
assembled by an adult. This product is not designed for industrial use. The use
of the product requires specific skills and knowledge to be able to avoid injury
through a crash or collision. Always adjust according to the age of the user and
use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Bikey running bike
Item number: 10714, 10715
Handlebar height adjustable: 53 – 56 cm
Saddle height adjustable: 39 – 43 cm
Weight: 2.8 kg
Maximum user weight: 35 kg
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Frame with rear wheel
1 x Saddle with seat post
1 x Handlebars
1 x Front wheel fork
1 x Bag with front mudguard, screw and nut, covers, washers and guide sleeves
1 x Front wheel
1 x Bag with tools and clamp
1 x Instruction manual
Other items included are meant to facilitate safe transportation and are not
required for the installation and use of the product.
SAFETY INSTRUCTIONS
• This product is only suitable for smooth paved surfaces. Do not use it on
public roads.
• The bike is only intended for use by one person.
• Warning! Please ensure that your child wears the appropriate protective
clothing, such as a helmet.
• Warning! The bike is not equipped with a breaking system since feet provide
the motion power to the driving wheels. Therefore, it is necessary to wear
shoes while using the bike. There is a risk of injury.
• Do not allow your child to ride the bike at dusk, at night or in poor visibility.
• To prevent putting your child or others in danger, you should not let the bike
be used on roads or thoroughfares or on slopes or hills. Avoid using it in the
proximity of stairs or open water.
• Inspect the bike before each use to ensure that all parts are still fixed in place
correctly and that the bike is functioning as intended.
• This product contains small parts which could cause asphyxia if swallowed.
Supervise children during the assembling. This product must be assembled
by an adult. Children should only use the product when they are under adult
supervision.
• Please ensure that your child keeps both hands securely on the handlebars in
order to maintain better control over the bike.
• The use of the product requires specific skills and knowledge to be able to
avoid injury to the user and third parties through a crash or collision.
• Warning! Protective equipment should be worn. Not to be used in traffic.
35 kg max.
• Warning! Not suitable for children under 36 month because of the risk of
swallowing small parts. Choking Hazard!
All images are examples of the design.
ATTACHING THE WHEELS AND SADDLE
1. Attach the mudguard for the front wheel to the front fork using screw and nut.
The rear wheel (1) is pre-mounted. Only the front wheel (2) has to be moun-
ted. Insert the front wheel (2) into the front wheel fork by removing the axle
lock washers (3) and external nuts (4a) from the wheel axle. Check whether
the nuts (4b) are firmly screwed and hence hold the spacers (5) in place. Now
secure the wheel with the aid of the hooks to the axle lock washers (3) in or-
der to hook these into the holes on the fork. Tighten the nuts (4a) to the axles.
2. Attach the saddle (6) as shown in the picture. The cover (7) should initially be
pulled over the seat's supporting tube. However, this is not necessary with
the lowest saddle setting. Please take care not to exceed the maximum seat
height by refraining from pulling the saddle support higher than the "MAX" in-
dication as exceeding the maximum saddle height could lead to serious
injuries.
ATTACHING THE HANDLEBARS
Assemble the handle bars (8) parallel to the front axle, i.e. at right angles to the
front wheel. The cover (7), the clamp (9) and the two plastic washers (10) have to
be pulled over the front wheel fork and the handlebar supporting tube as shown
in the illustration. Insert the guide sleeves (11) into the stem of the frame as
shown in the picture. The vertical supporting rod has to be stuck into the upper
end of the fork (with spreader). The clamp (9) must be completely attached to
the front wheel fork and not directly to the vertical support. In order to set the
highest position of the steering rod, the vertical supporting tube can be pulled
out to the "MAX" indication. Do not pull out the rod further as this might lead to
accidents. Then attach the clamp (9) securely with the washer and nut. Please
ensure that the steering rod is positioned correctly in relation to the front wheel
before tightening the screw.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local council authorities will be able to answer your
questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/.
4/8