Technical Specifications; Care And Maintenance - Hudora 10510 Instrucciones Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING YOUR PRODUCT!
Please read these instructions carefully. The instructions are an integral part of the product. Therefo-
re, please store them and the packaging carefully in case questions arise in the future. Please always
include these instructions when you are handing on the product to a third-party. Children should only
assemble or use the product when they are under adult supervision. This product is not designed for
industrial use. Use the product for its intended purpose only.

TECHNICAL SPECIFICATIONS

Item: Child's bicycle RS-15 2.0 / RS-16 2.0
Item number: 10510, 10512 / 10511, 10513
Maximum assembly dimensions: 1150 x 540 x 710 mm
Maximum saddle height: 55 cm
Minimum saddle height: 50 cm
Maximum user weight: 45 kg
Maximum weight: 57 kg
If you have assembly problems or would like further information on the product, we have all you need
and more at http://www.hudora.de/.
COMPONENTS
10510 / 10512
F. Steering head
A. Handles
G. Mudguard
B. Clamp
H. Rim brake
C. Brake lever
I. Front wheel fork
D. Handlebar stem
J. Wheel
E. Brake cable
ASSEMBLY
Take the individual parts out of the box and check that you have everything.
Assembling the saddle:
Stick the saddle rod into the saddle post and adjust it to the re-
quired height. Tighten the nut (A). Note that the screw should be
MAX
tightened with a force of 10 Nm. Please ensure that the saddle
A
B
post is not mounted higher than indicated by the marking. The
height of the saddle should be set such that the child can reach
the ground with the tippy-toes of both feet (B).
Assembling the handlebars and front wheel fork:
Stick the handlebars and front wheel fork into the stem of the
frame. Make sure that the fork is properly inserted into the stem.
The marking of the maximum height setting should not be visi-
ble. Lock the handlebars in place at the right height and attach
the handlebar clamp. The screw should be tightened with a force
of 10 Nm. The right seating position for children is: the handle-
bars should be mounted a little higher than the saddle. Please
heed the safety markings!
Front wheel assembly:
After you remove the nut and washer from the front wheel axle,
push the front wheel from the bottom into the front fork. If you
are unable to push the wheel through the brake shoe, loosen
the brake cable and allow the brake shoe to spread apart. After
that, tighten the brake shoe again to ensure that the brakes can
flawlessly grab the rim. The distance should be approx. 1.5 mm.
As shown in the image, place the washer on the axle and alter-
nately, but symmetrically, screw the nuts into place. Before the
nuts are completely fastened, ensure that the wheel runs free
and sits symmetrically on the fork.
Assembling the pedals:
L
R Screw the pedals into the pedal cranks. The right pedal is mar-
ked with (R) and the left with (L). The right pedal (R) is tightly
screwed into place in a clockwise direction, i.e. to the right. The
left pedal (L) is tightly screwed into place in an anti-clockwise
direction, i.e. to the left.
All images are examples of the design.
EN 14765
10511 / 10513
P. Chain guard
K. Frame
Q. Luggage carrier
L. Front chain wheel
R. Saddle
M. Pedal crank
N. Pedal
O. Stand
HUDORA | Jägerwald 13 | 42897 Remscheid | Germany
Attaching the front mudguard:
Remove the nut from the brake mount in order to attach the mudguard. Attach the mudguard and tig-
hten the screws once again so that the mudguard can no longer be turned. Check in regular intervals
that the mudguard is screwed on tightly.
ADJUSTING THE BRAKES
enough, tighten the brake cable (E), so the brake pads located at the correct distance from the rim .
If this does not suffi ce, then you will need to retighten the brake cable so that the brake shoes stand
at a suitable distance from the wheel rim.
WARNING
If you have problems with adjusting the brakes or when you encounter general problems, do not use
the bicycle until these problems are well solved. Please consider that the front brake is operated by the
right hand. The coaster is operated by the foot when the pedal is pushed backwards instead of coming
forward. In case of sudden or hard braking do not only used the hand brake. The danger excists that you
tumble forward. After you have assembled all components, make sure that all connections are tightly
screwed together before allowing your child to play with the bicycle.
CAUTION!
The bicycle should only ever be used under adult supervision. Please use the bicycle in suitable play
areas only. It does not correspond with road traffi c regulations. It may not be used on the road and should
not be used in the dark. The bicycle corresponds to the provisions of the European norm EN 14765.
When used as intended, risks during play are excluded to a large degree. However, please consider that
unforeseeable situations and risks can arise due to children's natural play instinct and temperament and
are not the manufacturer's responsibility. Therefore, please instruct your children on the correct use of
the bicycle and make them aware of any possible risks. Explain the main braking system, the coaster in
particular. Children should wear protective clothing (helmets, refl ectors, etc.) and closed shoes. Please
do not use the bicycle in the proximity of stairs, slopes, steep ground, swimming pools or other areas of
open water. Please consider that in case of a wet road, the braking distance is longer. Stairs in the vicinity
should be blocked off so that children can never cycle down them on the bicycle.

CARE AND MAINTENANCE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product
for damage or traces of wear and tear before and after each use. Focus your attention mainly on the
pads/brakes, wheels, rims and steeringwheel. If any of these parts is worn, it should be replaced imme-
diately. Store the product in a safe place where it is protected from the elements, cannot be damaged,
and cannot injure anyone. The chain should be regularly oiled. Please use a suitable chain oil for this
only. Also check the tension of the chain (max. 1.5 cm slack). If there are problems with the chain or
brakes, the bike can not be used until this is well repaired. For your own safety, please use original spare
parts only. These can be sourced from HUDORA. Do not make any structural changes. If parts become
damaged or if sharp edges or corners should develop, the product may not be used any more. If in any
doubt, please contact our service team (http://www.hudora.de/service/).
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point provided in your
area. Local waste management companies will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just as much effort
into rectifying them. Therefore, you can fi nd numerous information on the product, replacement parts,
solutions to problems and lost assembly manuals at http://www.hudora.de/a/ZP/.
SPARE PARTS AND ORIGINAL ACCESSORIES AVAILABLE AT: http://www.hudora.de/a/ZP/
www.hudora.de
A. Lock nut
B. Mudguard
C. Washer
D. Fork
E. Front brake
If you need to adjust the brakes, use two wrenches – the
inner nut (C) is held with one wrench and then the other is
used to loosen the outer nut. Now carefully turn the inner
screw in a clockwise direction in order to loosen it or in an
anti-clockwise direction in order to tighten it, depending on
the brake's fastened state. Now keep the inner screw (C) in
position and tighten the outer screw (D) so that the screws
are locked in place against one another with the nuts. If the
distance between the brake shoes and the rim is too big,
loosen the lock nut (A) and turn the adjusting screw (B) until
the distance between the brake shoes and rim is reduced
to approx. 1.5 mm. Now tighten the lock nut. If this is not
Item no. 10510, 10511, 10512, 10513
As of 09/10
Page 2/6