Transporting The Machine; Hour Meter - Upright AB38 Manual Del Usuario

Transporting the Machine

T
RANSPORTING THE
B C
Y R A N E
Secure the straps to chassis lifting/tie down points only.
B F
Y O R K L I F T
D A N G E R
!
Forklifting and Lifting by Crane are for transport only.
See specifications for weight of machine and be certain that forklift is of adequate capacity to lift the
machine.
Forklift from the side by lifting under the Chassis.
B T
Y R U C K
1. Maneuver the machine into transport position
and chock wheels.
2. Secure the machine to the transport vehicle with
chains or straps of adequate load capacity
attached to the chassis lifting/tie down points.
C A U T I O N
Over tightening of the chains or straps attached to
the Tie Down lugs may result in damage to the
machine
H
O U R
To access the hour meter function perform the following steps.
1. Climb into the basket (with the machine powered up)
2. Push the platform emergency stop button.
3. Hold down the following buttons, Horn, Telescope & Upper Boom Lift.
4. While holding the buttons twist the emergency stop button to return power to the machine.
5. "hr" will now be displayed on the read-out, Pressing the right turn button will scroll through the
accumulated hours two digits at a time. For example, if pressing the right turn button once displays "20",
pressing it a 2nd time displays "58", and pressing it a 3rd time displays "hr", the elapsed time of operation
is 2058 hours.
Page 8
M
ACHINE
M
E T E R
!
Figure 4: Transporting the Machine
Lift / Tie Down Points
Operation Manual