Installation
Instructions
I-B-IOUTSIDE
BACK EXHAUST
(Horizontal
Duct)
INSTALLATION
OVERVIEW
B1. Prepare Rear Wall
B2. Attach Mounting Plate to Wall
B3. Prepare Top Cabinet
B4. Adjust Blower
B5. Mount the Oven
I
I
I
I
I
I
I
I-_
PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
• Read the instructions on the REARWALL TEMPLATE.
• Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the wall plate.
• Cut the opening, following the instructions of the
REAR WALL TEMPLATE.
r-_
ATTACH THE MOUNTING
PLATE
TO THE WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to
a wall stud.
[_
Remove the toggle wings from the bolts.
[_
Insert the bolts into the mounting plate through
the holes designated to go into drywall and reattach
the toggle wings to 3A"onto each bolt.
15