GE PVM1790 Instrucciones De Instalación página 7

Installation Instructions
TOOLS YOU WILL NEED
# 1 and#2 Phillipsscrewdriver
Tinsnips (forcutting
damper, if required)
Gloves
Safetygoggles
Pencil
Scissors
(tocuttemplate, i f necessary)
Saw(saber, holeor keyhole)
Ruleror tapemeasure
aightedge
Electric drill with ¾s",7½d',
_½" a nd%" drillbits
Studfinder or Hammer (optional)
Level
Carpentersquare
(optional)
Fillerblocksor scrap
wood pieces,if needed
for top cabinetspacing
(usedon recessedbottom
cabinet installationsonly)
Ductandmasking t ape
MOUNTING SPACE
66" or more
fromthefloor
tothetopof
theoven
Bottomedgeof
cabinetneedsto
be 30" or more
from the cooking
surface
Backsplash
NOTES:
• The space between the cabinets must be 30" wide
and free of obstructions.
• If the space between the cabinets is greater than
30", a Filler Panel Kit may be used to fill in the gap
between the oven and the cabinets. Your Owner's
Manual contains the kit number for your model.
• This oven is for installation over ranges up to
36" wide.
• If you are going to vent your oven to the outside,
see Hood Exhaust Section for exhaust duct
preparation.
• When installing the oven beneath smooth, flat
cabinets, be careful to follow the instructions
on the top cabinet template for power cord
clearance.
• Maximum cabinet depth above and beside the unit
is 13".
• For models with top venting holes: Do not allow
cabinetry or other objects to block the airflow of the
vent.
• The product should not be installed over any
cooktop or range with a combined BTU greater
than 60000 BTU.