Levenhuk Wezzer PLUS LP150 Guia Del Usuario página 16

– WIND/+ button to display wind speed and wind gust speed values.
– CHANNEL button to display indoor temperature and humidity.
• To reset the maximum value, hold the MAX/MIN button for more than 2 seconds while the maximum values are
displayed.
• To reset the minimum value, hold the MAX/MIN button for more than 2 seconds while the minimum values are displayed.
Alert setup
• To set the alert in normal mode, hold the ALERT button for more than 2 seconds to enter the alert setup mode.
• Press the WIND/+ and BARO/–/
• Press the ALERT button to turn the alert on/off.
• Press ALERT button to confirm and move to next setting.
Alert setup order: High Indoor Temperature Alert > Low Indoor Temperature Alert > High Indoor Humidity Alert > Low
Indoor Humidity Alert > High Outdoor Temperature Alert > Low Outdoor Temperature Alert > High Outdoor Humidity Alert
> Low Outdoor Humidity Alert > High Wind Speed Alert > High Wind Gust Speed Alert > Low Pressure Alert > High Intensity
Precipitation Alert > High Daily Precipitation Alert > High UV Index Alert > High Light Intensity Alert.
or is displayed when an alert is on.
• To exit the alert setup mode, press the
When an alert is triggered, the ringer will sound for one minute and the corresponding alert icon and weather reading will
flash.
• To turn off the alert sound, press the
ATTENTION! If an alert automatically turns off after one minute rather than being turned off manually, the
corresponding alert icon and readings will continue to flash until the readings move out of the alert range. The
weather alert will trigger again once the readings fall within the alert range.
Alert setup order
High indoor temperature alert
Low indoor temperature alert
High indoor humidity alert
Low indoor humidity alert
High outdoor temperature alert
Low outdoor temperature alert
High outdoor humidity alert
Low outdoor humidity alert
High average wind speed alert
High wind gust speed alert
Low pressure alert
High intensity precipitation alert
High daily precipitation alert
High UV index alert
High light intensity alert
buttons in alert setup mode to adjust the value up or down.
(Backlight/Snooze) button.
(Backlight/Snooze) button.
Setup range
–9.9... 50°C
(–14.1...122°F)
1–99%
–40... 70°C
(–40... 158°F)
1–99%
0–50m/s
2–180km/h
1–181mph
1–97 knots
0–50m/s
2–180km/h
1–181mph
1–97 knots
1–10hPa
0.03–0.3inHg
0.7–7.5mmHg
1–1000mm/h
0.04–39in/h
1–1000mm
0.03–39.37in
1–15
1–200klx
7–1580W/m
0–185kfc
16
2
Default value
50°C (122°F)
–9.9°C (14.1°F)
80%
40%
40°С (104°F)
0°C (32°F)
80%
40%
17m/s
62km/h
38mph
33 knots
17m/s
62km/h
38mph
33 knots
3hPa
0.09inHg
2.2mmHg
101mm/h
4in/h
101mm
4in
10
100klx
790W/m
2
92kfc