Descargar Imprimir esta página

Midea MIH740T463K1 Manual Del Usuario página 23

Publicidad

Idiomas disponibles

Idiomas disponibles

Pause Mode
• You can pause the heating instead of shutting the hob off.
• When entering the Pause mode, all the controls except the ON/OFF control are disabled.
Touch the lock/pause control.
When the hob is in the pause mode, all the controls are disable except the ON/OFF
always turn the induction hob off with the ON/OFF
down after 10min if you don't exit the pause mode.
Power Management Function
• it is possible to set a maximum power absorption level for the induction hob, choosing up to different
power ranges.
• induction hobs are able to limit themselves automatically in order to work at lower power level, to
avoid the risk of overloading.
To enter Power Management Function
1. Turn on the hob, then Press at the same time the
"+" (timer) and key lock.
To switch to another level
1. Press +/- from the timer.
Confirmation and Exit Power Management Function
1. Press at the same time + (timer) and key lock
for confirmation.
To enter pause mode
To exit pause mode
Touch the lock/pause control.
or
All the indicator will show " 11"
control in an emergency. The hob will shut
2. The timer indicator will show " P5" which
means power level 5。The default mode is on
7.4kW.
2. There are 5 power levels, from "P1" to "p5".
The timer indicator will show one of them.
"P1" : the maximum power is 2.5kW.
"P2" : the maximum power is 3.5kW.
"P3" : the maximum power is 4.5kW.
"P4" : the maximum power is 5.5kW.
"P5" : the maximum power is 7.4kW.
2. Then the hob will be turned off.
20
, you can

Publicidad

loading