2nd position. Place the trimmer at a
right angle to your skin and move it
downward to trim sideburns.
Cleaning your shaver
(see fig. 5)
After every shave, press the foil
frame release button to pop open
the foil frame {see fig. 5A). Turn the
shaver on and rinse the inner blade
under running water or in a basin
(see fig. 5B). After rinsing, switch
the shaver off and leave it to dry
without closing the foil frame and
the protective cap. After the shaving
head dries,.close the foil frame and
replace the protective cap on the
shaver.
Replacing shaving head
components
With daily use, the outer foil may
need to be replaced every year and
the inner blade every 2 years.
Remove the outer foil
Press the foil frame release button
to pop open the foil frame. Pull the
foil frame vertically out of the upright
shaver. Remove the outer foil from
the frame by slipping it off the
hooks. (Caution: The foil may spring
out when released from the hooks.)
Insert the new outer foil
Slip the foil into the frame with the
plastic edges facing inward. Guide
the plastic edges onto the hooks in
the frame (see fig. 6).
Remove the inner blade
Pull the open foil frame vertically out
of the upright shaver to remove the
foil frame. Remove the inner blade
by grasping it firmly at both ends
and pulling straight away from the
shaver.
Insert the new inner biade
Hold the inner blade at both ends
and press downward until it snaps
into place (see fig. 7).
ATTENTION:
The product you have purchased is
powered by a nickel cadmium bat-
tery which is recyclable. At the end
of it's useful life, under various state
and local laws, it is illegal to dispose
of this battery into your municipal
waste stream. Please call 1-800-8-
BATTERY for information on how to
recycle this battery.
de
How to remove the
built-in rechargeable
battery before disposal
of the shaver (see fig. 8)
The battery in this shaver is not
intended to be replaced. The proce-
dure described in fig. 8 is intended
only for removal of proper disposal.
Discard shaver after the battery has
been removed.
WARNING:
Do not attempt to
replace the batteries for the pur-
pose of reusing the shaver. This
could result in the risk of fire or
electric shock.
1. Remove the protective cap, outer
foil frame and inner blade.