Descargar Imprimir esta página

Würth MINI MULTI Traducción Del Manual De Instrucciones De Servicio Original página 19

Bateria-luz led-luz de trabajo

Publicidad

Continuous light control
(10 % - 100 %):
Briefly press the
light and extra light as needed). The light is
switched on.
Keep the button depressed. Flashing indica-
tes that the light has reached the minimum
(10 %) or maximum (100 %) light current.
If the infinitely variable light control system
has been interrupted before the minimum
or the maximum luminous flux has been
reached, the lamp is adjusted into the oppo-
site direction when the infinitely variable
light control system is re-activated.
Obstacle Detection System (ODS)
The lamp switches off automatically as soon
as an obstacle is detected by the sensor.
The LCD display remains activated in order
to signal to the user that the luminous flux
has been interrupted as a result of the
ODS. As soon as the obstacle has been
removed, the luminous flux is automatically
re-activated.
Charge the battery
• Charge before first use. Charging
time: 6-8 h
• Connect the power supply unit to the
lamp.
• Switch off the light during charging.
Charging is complete as
soon as the LCD display
shows 100 % or all four
bars of the charge level display are black.
Repeated flashing indicates that the light
should be charged.
Note
Always keep the charging socket of the
lamp free of dirt.
button (activate main
Maintenance and care
Visual inspection before starting
work
The lamp is maintenance-free. Nevertheless,
the lamp and accessories must be checked
for external damage before each use.
If damage is visible, the lamp must
not be used. It must be repaired or
disposed of by a commissioned and trained
person. Please contact your Wurth branch.
Cleaning
Switch off the lamp and disconnect the
mains plug before carrying out any cleaning
work. To clean the lamp, wipe with a clean,
soft cloth. Remove stubborn dirt with a
damp cloth and a standard household clea-
ner. Never use cleaning agents containing
alcohol, solvents or abrasives as these will
damage the housing.
Storage
Fully charge the fixture before storing it for
an extended period of time. Recharge the
lamp regularly if it is not used for a longer
period of time.
Disposal
Do not throw the lamp
into the household waste!
Always recycle small electrical
appliances and packaging in
an environmentally friendly
manner. According to the Euro-
pean Directive 2012/19/EU, power tools
that are no longer usable must be collected
separately and recycled in an environmen-
tally sound manner.
13

Publicidad

loading

Este manual también es adecuado para:

0827 981 820