Husqvarna PG 450 Manual Del Usuario página 14

4. Use a hammer to remove the diamond tools.
5. Attach new diamond tools on the tool plate.
Introduction
WARNING:
maintenance, you must read and
understand the safety chapter.
14
Maintenance
Before you do
6. When the diamond tools are replaced, put the
product into operation position.
To connect a dust extractor
Use a Husqvarna dust extractor system.
1. Connect the dust extractor to the product. Use a 50
mm (2 inch) hose.
2. Make sure that the filters in the dust extractor are
clean and not damaged. Monitor the dust during the
operation.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not
a service agent, speak to them for information about the
nearest service agent.
For more detailed information, refer to
www.husqvarnaconstruction.com.
2209 - 002 - 21.03.2024