Publicidad
Idiomas disponibles
Idiomas disponibles
3.2.1. REMOVE THE TRANSPORT BOLTS
Warning!
■
You must remove the transport bolts from the backside
before using the product
■
You'll need the transport bolts again if you move the
product, so make sure you keep them in a safe place.
Please take the following steps to remove the bolts:
1.
Loosen 4 bolts with spanner and then remove them.
2.
Stop the holes with transport hole plugs.
3.
Keep the transport bolts properly for future use.
Warning!
■
You must remove the transport bolts from the backside
before using the product.
Loosen the 4 transport
bolts with a spanner.n
3.3. LEVELLING THE WASHING MACHINE
Warning!
■
The lock nuts on all four feet must be screwed tightly against the housing.
3.4. CONNECTING THE WASHING MACHINE
3.4.1. CONNECTING THE WATER SUPPLY HOSE
Warning!
■
To prevent leakage or water damage, follow the instructions in this chapter!
■
Do not kink, crush or modify water inlet hose.
■
Connect manually, do not use tools. Check if the connections are tight.
Remove the bolts
including the rubber parts
and keep them for future
use.
1.
Check if the legs are securely attached to the
housing. If not, turn them to their original positions
and tighten the nuts.
2.
Loosen the lock nut and turn the foot until it is in
close contact with the floor.
3.
Adjust the legs and lock them with a spanner,
making sure that the machine is steady.
11
Close the holes using the
cover caps.
EN
Publicidad
