Qilive Q.6248 Manual Del Usuario página 25

1.Open the service door
3.Remove extraneous matter
Caution!
■ When the appliance is in use and depending on the programme selected there
can be hot water in the pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the cycle, and is empty. When
replacing the cover, ensure it is securely re-tightened.
8. TROUBLESHOOTING
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.
Description
Washing machine
cannot start up
Door can't be opened
Water leakage
Detergent residues in
the box
Indicator or display
does not light
2.Open the filter by turning to the
4.Close the lower cover cap
Reason
Door is not closed
properly.
Washer's safety
protection design is
working
The connection between
inlet pipe or outlet hose is
not tight
Detergent is dampened
or agglomerated
Disconnect the power.
PC board or harness has
connection problem.
25
counterclockwise
Solution
Restart after the door is
closed
Check if the clothes is
stuck
Disconnect the power,
restart the product
Check and fasten water
pipes
Clean up outlet hose
Clean and wipe the
detergent box
Switch off the power and
check if the mains plug is
connected properly.
EN