Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended
on a weekly basis. If service is required, return your heater to Vornado. See WARRANTY for instructions.
1. Unplug heater before cleaning.
2. Use brush attachment on
household vacuum cleaner to
vacuum any accumulated dust
off Front Outlet Grille.
3. Use brush attachment on
household vacuum cleaner to
vacuum any accumulated dust
off Inlet Filter on back of heater.
4. Wipe down entire heater with a
soft, dry cloth.
14 English
STORAGE
During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
You should periodically blow
out the heater with pressurized
Cleaning is recommended before storage.
air to keep heat element and
motor clear of dust, hair and debris
that can build up inside the heater
1. Unplug power cord, wrap cord and slide inside storage tray on
as it moves air during use. This also
back of heater.
eliminates unwanted odors caused
by accumulation of these particles
2. Cover, or place back in retail carton if available. This prevents
inside the unit.
heater from accumulating dust over time.
3. Store heater in cool and dry location.
Note: Inlet Filter on back of heater
is not removable.
Note: Do not modify the product
with any aftermarket accessory.
DISPOSAL
Dispose of all packaging
materials in an environmentally
responsible manner.
RESET HEATER
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multilevel safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked. If this happens, the safety shut-off system cuts
power to the heater and you must manually reset the heater.
1. Power heater off, then unplug power cord.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing heater to cool down.
4. Plug in power cord and place heater in desired position.
5. Power heater On. Your Vornado Heater should now
function normally.
Note: If the safety shut-off system repeatedly shuts off your heater
or if it will not reset after following the above procedure, contact
the Vornado Authorized Service Center.
15
English
Publicidad
