Deismounting - Kollmorgen Cartridge DDR Manual Del Producto

Kollmorgen
17.2.3

Deismounting

Servomotors Cartridge DDR
09/2012
Statusprior to mounting
When the motor is mounted to a machine, there is a black Philips
A
screw in the hole labeled "B" and there is a silver hex alignment screw
B
in the hole labeled "A".
Loosen Compression coupling
Remove hexagon socket-head screw "A".
A
B
Use a hexagon key and loosen the clamping screw in "A".
Remove Motor from Machine Frame
Loosen the 4 flange screws.
Secure for Transportation
Remove the Philips screw from thread "B".
A
B
Screw the Philips screw into thread "A" with a tightening torque of at
least 30 Nm.
A
B
Screw the hexagon socket-head screw into thread "B" with a tightening
torque of at least 30 Nm.
Status after dismounting
When the motor is not mounted to a machine, there is a black Philips
A
screw in the hole labeled "A" and there is a silver hex alignment screw
B
in the hole labeled "B".
Mechanical Installation
English - 43