Baker Hughes Druck DPI611-05G Guia De Inicio Rapido página 7

Introduction
The DPI611 is a battery-powered instrument for electrical
measure and source operations. You can use the touch-
screen to display the different parameters. The DPI611
instrument measures and displays Pneumatic
Pressure/Vacuum generated by the instrument. The range
of pressure generation is dependent on the model
selected.
Models
The DPI611 models are listed below:
Model Pressure Range
DPI611-05G -1 to 1 barg (-14.5 to 15 psig)
DPI611-07G -1 to 2 barg (-14.5 to 30 psig)
DPI611-10G -1 to 7 barg (-14.5 to 100 psig)
DPI611-11G -1 to 10 barg (-14.5 to 150 psig)
DPI611-13G -1 to 20 barg (-14.5 to 300 psig)
Safety
The manufacturer has designed this equipment to be safe
when operated using the procedures detailed in this
manual. Do not use this equipment for any other purpose
than that stated, the protection provided by the equipment
may be impaired.
This publication contains operating and safety instructions
that must be followed to make sure of safe operation and to
maintain the equipment in a safe condition. The safety
instructions are either warnings or cautions issued to
protect the user and the equipment from injury or damage.
Use qualified technicians
1
for all procedures in this publication.
Pressure
Do not apply pressures greater than the maximum working
pressure to the equipment.
Maintenance
The equipment must be maintained using the procedures
in this publication. Further manufacturer's procedures
should be done by an authorized service agents or the
manufacturer's service departments.
Technical Advice
For technical advice contact the manufacturer.
1. A qualified technician must have the necessary technical
knowledge, documentation, special test equipment and
tools to carry out the required work on this equipment.
and good engineering practice
Symbols
Symbol Description
This equipment meets the requirements of all
relevant European safety directives. The equipment
carries the CE mark.
This equipment meets the requirements of all
relevant UK Statutory Instruments. The equipment
carries the UKCA mark.
This symbol, on the equipment, indicates that the
user should read the user manual.
This symbol, on the equipment, indicates a warning
and that the user should refer to the user manual.
USB ports: Type A; Mini-type B connector.
On / Off
Ground (Earth)
Druck is an active participant in the UK and EU
Waste Electrical and Electronic Equipment (WEEE)
take-back initiative (UK SI 2013/3113, EU directive
2012/19/EU).
The equipment that you bought has required the
extraction and use of natural resources for its
production. It may contain hazardous substances
that could impact health and the environment.
In order to avoid the dissemination of those
substances in our environment and to diminish the
pressure on the natural resources, we encourage
you to use the appropriate take-back systems.
Those systems will reuse or recycle most of the
materials of your end life equipment in a sound way.
The crossed-out wheeled bin symbol invites you to
use those systems.
If you need more information on the collection,
reuse, and recycling systems, please contact your
local or regional waste administration.
Please visit the link below for take-back instructions
and more information about this initiative.
https://druck.com/weee
Note: More marks and symbols are specified in the User
Manual (Druck DPI611 Pressure Calibrator, K0571).
English–DPI611 Safety and Quick Start Guide | 1
Copyright 2014 Baker Hughes Company.