Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
23. Assembling the Fireplace
• Locate the Front Panel with Control Button (EA).
• Using Screws (FF), secure the Front Panel with
Control Button (EA) inside the inner surround
assembly (T, U, and V) as shown.
Hardware Used
Ø3.5x12mm
FF
Screw
24. Attach the front Fireplace Surround to the
Main Assembly
• Align the pre-installed hardware on the edges of
the main assembly with the pre-drilled holes on
the fireplace surround.
• Secure the main assembly to the fireplace
surround by tightening the hardware with a Phillips
screwdriver as shown.
25. Securing the front Fireplace Surround to the
Main Assembly
• Secure the front Fireplace Surround to the main
assembly by tightening the hardware (LL and MM)
with a Phillips screwdriver as shown.
Hardware Used
Ø6.3x30mm
LL
Bolt
Ø16mm
MM
Washer
28WM373 REV2.0
x5
x8
x8
17
23
EA
U
V
24
U
25
T
Publicidad
