ASSEMBLY INSTRUCTIONS
32. Assembling the Log Set
• Place the Log Set Left (EJ) and Log Set Right
(EK) into the Log Set Middle (EL) and Ember Bed
(EI) as shown.
33. Assembling the Log Set
• Route the wires of the Log Set Left (EJ) , the
Log Set Right (EK) and Log Set Middle (EL) down
the back of the Ember Bed (EI) and into the
receiving tabs to secure in place. Refer to the
lower diagram.
• Gently plug the cords from the Log Set Left
(EJ), the Log Set Right (EK) and Log Set Middle
(EL) into the ports as shown. Ensure the cords are
plugged in straight.
34. Assembling the Fireplace
• Place the assembled log set into the back of the
unit behind the glass panel.
• Push the tabs beneath the log set into the holes
on the bottom panel.
28WM373 REV2.0
32
33
EK
34
20
EK
EL
EL
EJ
EI
EJ
EI
EI