Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
FUNCTION
TEMPERATURE IN-
CREASE / DECREASE
COOL DOWN CYCLE
TIMER
FLAME SPEED
SAFER PLUG ®
28WM373 REV2.0
ICON
The up and down buttons "
will increase / decrease temperature setting.
The thermostat setting range is 62°F - 82°F
( 17°C - 27°C) or continuously ON.
The thermostat is adjustable by 2°F or 1°C
increments.
Before the heater powers off, the fan will continue to
run for a period of time to cool down the internal
parts.
Pressing the timer button will cycle through the
timer settings: 30 minutes, 1 Hour, 2H, 3H, 4H, 5H,
6H, 7H, 8H, 9H and OFF (00).
The flame speed is only adjustable from the remote
control. Each flame setting has 5 speed options
available. Setting S1 is slowest ranging up to set-
ting S5 which is the fastest.
This product is equipped with a Safer Plug ® ; an
advanced safety device that helps prevent electrical
fires caused from faulty outlets.
Overloading of outlets, adapters and surge protectors
may cause overheating, damage, and increase risk of
fires. Safer Plug ® continuously monitors the tempera-
ture in the plug and outlet and will turn off the heater
to prevent unsafe outlet overheating.
If the Safer Plug ® cuts the power due to unsafe con-
ditions it will show an "
this occurs the Safer Plug ® has prevented a poten-
tially unsafe condition.
To reset the device if this occurs, first allow the plug
to cool down. Once the plug has cooled down, unplug
the device and wait 5 seconds, then plug back in and
continue to use normally.
If the Safer Plug ® continues to activate your out-
let may be faulty. Check your heater cord and plug
connections. Faulty wall outlet connections or loose
plugs can cause the outlet or plug to overheat. Be
sure the plug fits tight in the outlet. Heaters draw
more current than small appliances, so overheating
of the outlet may occur even if it has not occurred
with the use of other appliances. During use check
frequently to determine if your plug, outlet or face-
plate is HOT! If so, discontinue use of the heater and
have a qualified electrician check and/or replace the
faulty outlet(s).
25
DESCRIPTION
" on the remote
"message on the screen. If
Publicidad
