Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
FUNCTION
POWER
FLAME
HEATER
28WM373 REV2.0
ICON
The POWER button supplies power to all the
functions of the heater. Pressing the POWER button
again will put the heater in standby mode.
Holding the Power button on the control panel for 10
seconds will disable the heater function.
There are 5 brightness levels that can be selected
and OFF (00) setting. Settings F5 - F1 decrease in
brightness.
Press the heater button on the control panel to turn
on/off (00) and adjust the heater setting.
To change between °F and °C, press and hold the
HEATER button on the control panel for 3 seconds.
The thermostat setting range is 62°F - 82°F
( 17°C - 27°C) or continuously ON.
24
DESCRIPTION
CONTROL
PANEL
LOCATION
Publicidad
