1 About This Documentation
1.1 Scope of documentation
This documentation applies to the following products:
• 3 842 999 903, HQ 2/U lift transverse unit
This documentation is intended for installers, operators, service technicians,
and system owners.
This documentation contains important information on the safe and appropriate
assembly, transportation, commissioning, operation, use, maintenance, disassembly,
and simple troubleshooting of the product.
Read this documentation completely, especially chapter 2 "Notes on Safety"
and chapter 3 "General Notes on Equipment and Product Damage", before
working with the belt section.
1.2 Required and supplementary documentation
Only commission the product once you have obtained the system documentation
that is marked with a book symbol
contents.
Table 1: Required and supplementary documentation
Title
Instructions for Employees on Safety 3 842 527 147
MTparts
1.3 Presentation of information
Uniform safety instructions, symbols, terms, and abbreviations have been used in
this documentation in order to ensure that you can get to work quickly and safely
with your product. They are discussed in more detail in the following sections.
1.3.1
Safety instructions
This documentation contains safety instructions in section 2.6 "Product-specifi c
safety instructions" and chapter 3 "General Notes on Equipment and Product
Damage" and before any actions or steps whenever there is a danger of personal
injury or damage to the equipment. The measures described to avoid these hazards
must be observed.
About This Documentation
and understood and complied with its
Document number
Document type
3 842 529 770
Spare parts list on CD
3 842 546 879/2015-07, MIT: HQ 2/U, Bosch Rexroth AG
5/38