Bosch Rexroth HQ 2/U Instrucciones De Montaje página 45

1.3.3 Designations
This documentation uses the following designations:
Table 4: Designations
Designation Meaning
HQ 2/U Lift transverse unit from the Rexroth TS 2plus transfer system
WT 2 Workpiece pallet from the Rexroth TS 2plus transfer system
2 Notes on Safety
2.1 About this chapter
The product has been manufactured according to the accepted rules of current
technology. Even so, there is a risk of injury or damage if this chapter and the safety
information in these instructions are not observed.
Read these instructions completely and thoroughly before working
with the product.
Keep this documentation in a location where it is accessible to all users
at all times.
Always include the operating instructions when you pass the product
on to third parties.
2.2 Intended use
This product is an incomplete machine.
The product may be used as follows:
• For installation in a Rexroth TS 2plus transfer system
• For lifting from the section and transverse transport
of Rexroth WT 2 workpiece pallets
• Maximum load/section load: see Technical data on page 37
• For ambient conditions, see page 37
The product is intended exclusively for professional applications and not designed
for private use.
Intended use includes having read and understood these instructions,
especially chapter 2 "Notes on Safety".
2.3 Improper use
Any use other than that described in section "Intended use" is considered improper
and is not permitted.
Bosch Rexroth AG is not liable for any damages resulting from improper use.
The user alone bears the risks of improper use of the product.
The following foreseeable cases of misuse are also considered improper use:
• Transport of goods other than those specifi ed.
• Operating the product without the housing element.
• Operating the product in accumulation operation.
Notes on Safety
3 842 546 879/2015-07, MIT: HQ 2/U, Bosch Rexroth AG
7/38