Bosch Rexroth HQ 2/U Instrucciones De Montaje página 69

1. Dismount the retaining
ring.
2. Lift the motor/gear
combination until the
toothed belt comes off
the toothed belt wheel.
3. Slip the toothed belt off
the toothed belt wheel.
4. Replace the toothed belt
wheel.
5. Lower the motor/gear
combination carefully.
6. Mount the retaining ring.
7. Check the tension of
the toothed belt (see
page 30, Fig. 13) and
correct it if necessary.
10.4.2 Replacing the toothed belt wheel
3
1
6
4
2 5
Fig. 15: Replacing the toothed belt wheel
Maintenance and Repair
3 842 546 879/2015-07, MIT: HQ 2/U, Bosch Rexroth AG
31/38
546 879-12