Bosch Rexroth HQ 2/U Instrucciones De Montaje página 55

1. Mark the location for the
HQ 2/U installation.
2. Mount the bracket in
the middle on the inside
of the section, but only
tighten the screws by
hand.
3. Dismount the cover
sheet (A).
4. Place the HQ 2/U on the
brackets.
5. Screw the HQ 2/U by
hand onto the brackets.
6. Align the HQ 2/U with
the transverse section.
7. Tighten all screws.
8.
Mount the cover sheet.
7.5 Assembling the product
7.5.1 Assembling the HQ 2/U lift transverse unit, b
1
5
3
Fig. 4: Assembling the HQ 2/U lift transverse unit, b
=
=
M
SW4
M = 5Nm
D
4
SW5
≥ 240 mm
L
3 842 546 879/2015-07, MIT: HQ 2/U, Bosch Rexroth AG
Assembly 17/38
≥ 240 mm
L
2
SW13
= 25Nm
D
SW13
M = 25Nm
D
546 879-03