Samsung 5 Serie Manual Del Usuario página 24

C3
White Balance
You can adjust the color temperature for more natural picture colors.
R-Offset: Adjust the low level red intensity.
G-Offset: Adjust the low level green intensity.
B-Offset: Adjust the low level blue intensity.
R-Gain: Adjusts the high level red intensity.
G-Gain: Adjusts the high level green intensity.
B-Gain: Adjusts the high level blue intensity.
Reset: Resets the default white balance.
Changing the adjustment value will refresh the adjusted screen.
Flesh Tone
You can emphasize the pink flesh tone in the picture.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement -_ Off / On
You can emphasize object boundaries in the picture.
Picture Options
[_ In PC mode, you can only make changes to the Color Tone, Size and Screen Burn
Protection from among the items in Picture Options.
Color Tone -_ Cool / Normal / Warm1 / Warm2
You can select the most comfortable color tone for viewing.
@ Warm1 or Warm2 is only activated when the picture mode is Movie.
@ Settings can be adjusted and stored for each external device you have connected to
an input of the TV.
Size
Occasionally, you may want to change the size of the image on your screen. Your TV
comes with six screen size options, each designed to work best with specific types
of video input. Your satellite receiver may have its own set of screen sizes as well. In
general, though, you should view the TV in 16:9 mode as much as possible.
• 16:9 : Sets the picture to the 16:9 aspect ratio.
• Zoom1: Stretches the 16:9 aspect ratio picture vertically.
• Zoom2: Stretches the Zoom 1 picture vertically.
• Wide Fit: Stretches the picture both horizontally and vertically to display the optimal
picture.
• 4:3: Sets the picture to the 4:3 aspect ratio.
• Screen Fit: Displays the full native HD signal that cannot be viewed using a normal TV.
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
16:9 Zoom1= Zoom2
I 11 I
L
Wide Fi_ 4:_3 Screen Fit
Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting Zoom1, Zoom2 or Wide Fit:
Press the 4 or _. button to select Position, then press the ENTER_ button.
Press the ,_ or T button to move the picture up and down.
After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may made need to center the picture:
Press the 4 or _. button to select Position, then press the ENTER_ button.
Press the A T, _1or I_button to move the picture.
Reset: Press the *_ or _, button to select Reset, then press the ENTER_ button. The TV will be reset to 16:9.
[_ HD (High Definition): 16:9 - 1O8Oi/108Op(1920x1080), 720p (1280x720) Continued...