Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
" HIGH".
• To turn off the fan, press the button
"OFF" (22), either on the control panel or
from the remote control.
• In the section "MODE" (19) you could
select the different types of air.
• The timer can be set between 0.5 and
7.5 hours by pressing the "TIMER"
button (20).
• To activate/conclude the swing option,
press the "SWING" button (21).
• To get the desired vertical inclination,
push lightly the fan head (8) to get the
desired direction.
Remote control (
06)
The device incorporates a remote control,
for a more comfortable and efficient use.
In order for the remote control to work, it
must always be aimed at the fan.
Before you start using it, please take a few
minutes to familiarize yourself with the
functions:
The remote control allows you to control:
On/Off, Speed, Oscillation, Timer and On/
Off modes.
• OFF (23): Switches the fan off.
• TIMER (24): Activation of the timer,
possible use of 1 hour, 2 hours, 4 hours
and even up to 7.5 hours. The desired
time is displayed on the fan.
• SWING (25): Press this button to swich
on/off the Swing mode.
• ON/SPEED (26): Press this button to turn
on the fan. Once it's switched on, each
press of the button switches between
the different speeds (there are 3 types of
speed: Low- Mid- High).
• MODE (27): Selection of the different
types of air.
• Sleep: Automatically switches on and
off according to the selected speed.
• Natural: Automatically changes speed
from high to low.
• Normal: Switches manually.
• LAMP (28): Press this button to switch
24
see picture 05 on page
the fan control lights on/off.
CLEANING AND MAINTENANCE
To clean the fan, follow these instructions:
• Turn the fan off and wait until it has
stopped completely.
• Disconnect it from the power supply.
• Be careful to prevent any liquid from
getting inside the appliance.
• Use only a soft damp cloth.
• Do not allow water at a high temperature
in contact with the plastic parts.
• Do not use abrasive cleaners. You can
use a neutral detergent.
• When you have finished cleaning it,
assemble it again and store it in a dry
place.
• If you are not going to use the fan
for some time, it is recommended to
remove the batteries from the remote
control and store it in a clean and dry
place.
Follow these indications in order to
optimize the maintenance:
• It is recommended to clean the water
tank at least once a week. If the water
tank is scaling, use a soft cloth with
cleaning solvent to clean it and rinse
with clean water.
• To clean the humidifier externally, use
a soft cloth immersed in water at 40°.
• Do not use sharp or hard objects to
scratch
the
ceramic part for transduction. It can
only be cleaned with a soft, damp cloth.
• Do not use a cloth with a chemical
solvent, gasoline, kerosene, or polishing
powder to clean the surface.
• Do not use random detergent for
cleaning. It is best to use clean water.
• Keep water away from the body of the
machine to prevent moisture from
internal electrical components that can
cause malfunction.
• Readjust the visible screws from time
to time to ensure a good performance of
the appliance.
vibrating
piezoelectric
Publicidad
