Publicidad
Idiomas disponibles
Idiomas disponibles
See tables and "Connection chart" at the back of
the manual.
Although the appliance is complete with all safety
devices, during installation and connection additio-
nal devices must be added if necessary to comply
with the relevant legal requirements.
A)Automatic resetting Thermostat: cuts off the
electricity supply in case of overheating. Once
the cause has been eliminated and temperature
is reduced, operation is restored automatically.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
IT
IT
data.
B)General hazard: read the manual carefully befo-
GB
B
re carrying out any procedure.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
DE
D)General hazard: dry operation is forbidden.
E)General hazard: all relevant regulations must be
FR
F
complied with. "Install in compliance with the re-
levant regulations and use in well ventilated pre-
ES
mises only".
F) General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to compy with the installation and commis-
sioning instructions".
English
TECHNICAL DATA
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
A
C
D
B
- 4 -
IDM-39611300200.tif
A
E
F
IDM-39611300300.tif
Publicidad
