Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL
PANEL AND FEATURES
/
Damp
Cool Down
Dry
Wrinkle
Guard
CheckLintScreen
EVENHEAT AUTO DRY
Norma|
Bu
ual
Heavy
Dut
Delicates
Time
press
Dry
TiME CYCLES
_-_
POWER
START/PAUSE
_ AutoMoistureSensing
er,ergy
savilg
ecn ,ology
Not all features
and options
are available
on all models.
Appearance
may vary.
O
CYCLE STATUS LIGHTS
Lights indicate
the progress
of the drying
cycles.
O
O
DRYER CYCLE KNOB
Use your
Dryer Cycle Knob to select availabie
cycles on your
dryer,
Turn the knob to select a cycle for your laundry
load,
See "Cycle
Guide"
for detailed
descriptions
of cycles.
EvenHeaf
TM
Auto Dry
with Auto Moisture
Sensing Control
Auto
Dry cycles
give the best drying
in the shortest
time.
Drying
time will vary
based on fabric
type,
load size, and
dryness
setting.
Time Cycles
Will
run the dryer for the specified
time on the control.
Press the Dry Temp button
to change
the drying
temperature
from
the default
setting,
if desired.
Press the Less Time or
More Time buttons to change
the drying
time from the
default
setting,
if desired.
Time Dry
Default
dry time setting
is 40 minutes.
Express Dry
Default
dry time setting
is 23 minutes.
OPTIONS AND SETTINGS
Dry Temp (for use wlth Time cycles only)
Select a drying
temperature
based on the fabrics
in
your
load. If you are unsure of the temperature
to select
for a load,, select the lower setting
rather
than the higher
setting.
See "Cycle
Guide".
NOTE: The Air Only
Temp Feature
is not available
on the
Auto
Dry Cycles.
Dry Level (for use with EvenHeaf
TM
Auto Dry
Cycles only)
Use with Auto
Dry cycles
to select the desired
dryness
level.
See "Cycle
Guide".
Wrinkle Guard
TM
Feature
When
you are unable
to remove
a load of clothes
from the
dryer
as soon as it stops, wrinkles
can form.
The WRINKLE
GUARD
TM
feature
periodically
tumbles,
rearranges,
and fluffs
the load to help keep wrinkles
from forming.
[]
WRINKLE
GUARD
TM
gives you a period
of heat-free,
periodic
tumbling
at the end of a cycle. Some models
provide
two time choices
(60 or 150 minutes),
other
models
provide
only one time choice
(90 minutes).
Press
the WRINKLE
GUARD
TM
button
to turn On or Off
at
any time before
the cycle
has ended.
Cycle Signal
The Cycle Signal
produces
an audible
sound when the drying
cycle is finished.
Promptly
removing
clothes at the end of the
cycle reduces
wrinkling.
Press CYCLE SIGNAL
until the desired
volume
(Off,
Low,
or High) is selected.
NOTE: When
the Wrinkle
Guard
TM
setting
is selected
and the Cycle Signal
is on, the tone will sound every
20 minutes
until the clothes are removed,
or the Wrinkle
Guard
TM
setting
ends.
Damp Signal (for use with
Evenheaf
TM
Auto Dry
Cycles only)
Selecting
the Damp
Dry Signal
will alert
you when your
clothes
are approximately
80% dry. This is useful when
you want to remove
lightweight
items in a mixed
load
to avoid
overdrying
or remove
partially
dry items that
may need ironing.
START/PAUSE BUTTON
Press START/PAUSE
to start a cycle, or press START/PAUSE
once while a cycle is in process to pause it.
POWER BUTTON
Press to turn the dryer on and off.
Publicidad
