Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Press POWER
@
POWER
Press POWER
button
to turn on the dryer.
4.
Select desired cycle
EVENHEAT AUTO DRY
Normal
TiME CYCLES
Select the desired
cycle
for your
load. See "Cycle Guide"
or
"Control
Panel and Features".
5.
Set cycle
settings
High
Med
High
Medium
Low
Air Only
150 Min
60 Min
Off
TIME
CYCLES
ONLY
AUTO
CYCLES
ONLY
Dry Temp (for use with Time Cycles only)
Press the Dry Temp button
to change
the drying
temperature
from
the default
setting.
Dry Level (for use with Auto Cycles only)
Normal
Dry Level is a good
starting
point for optimal
energy
savings.
You can select a different
Dry Level, depending
on your
load,
by
pressing
the button
for More, Normal,
or Less. Selecting
More,
Normal,
or Less automatically
adjusts
the Dry Level at which the
dryer
will shut off. Once a Dry Level is set, it cannot
be changed
without
stopping
the cycle.
Auto
Dry cycles give the best drying
in the shortest time.
Drying
time varies based on fabric
type, load
size, and dryness
setting.
NOTE:
More
Dry removes more load moisture.
Normal
Dry is used
for a starting
point for Auto drying.
Less Dry removes
Jess moisture
and is used for loads you may want to put on a hanger
to complete
drying.
WrinkJe GuardTM feature
[]
Get up to 60 or 150 minutes
for models
with two choices
(90
minutes
for models
with only one choice)
of heat-free,
periodic
tumbling
at the end of a cycle. Press the WRINKLE
GUARD
TM
button
to turn On or Off: at any time before
the cycle
has
ended.
[]
The WRINKLE
GUARD
TM
feature
is preset to "Off:". Jf selected
for other cycles, the WRINKLE
GUARD
TM
feature
setting
will
remain
"On" the next time that cycle
is selected.
6.
Select cycle
options
(if desired)
--TIME
CYCLES --
AUTO
CYCLES
ONLY
OFF/LOW/HIGH
Press appropriate
button
for selected
options,
Jf desired.
For
Time Cycles, press More Time Jf you want to increase
the cycle
length,
or press Less Time Jf you want to decrease
the cycle
length.
Less Time and More Time options
are available
with
Time Cycles only.
NOTE: Not all options
and settings are available
with all cycles.
The default
cycle settings
will illuminate
based on the cycle
selected.
See "Cycle
Guide".
For some cycles, you may select
alternate
settings
by pressing
the button
for that setting.
NOTE:
Not all options
and settings are available
with all cycles.
8
Publicidad
