Ratio R-ML800 Manual De Instrucciones página 28

TECHNICAL DATA
Type R-ML800 (R-ML-designation of machinery, representative of rotary hammer)
Voltage
Power input
No load speed
Impact rate
Impact energy
Chuck type
Drilling capacity max
Steel
masonry
Wood
Protection class
Machine weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values determined according to EN 62841:
Hammer drilling into concrete
Chiseling
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used especially what kind
of workpiece is processed dependant on the following examples and other variations on how the tool
is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
28
Vibration emission value a
Uncertainty K = 1,5 m/s²
Vibration emission value a
Uncertainty K = 1,5 m/s²
220-240 V~50/60 Hz
L = 94 dB(A) (Rotary hammer mode)
pA
L = 105 dB(A) (Rotary hammer mode)
wA
= 14.0 m/s²
h,HD
= 13.3 m/s²
h,CHeq
800 W
0-1200 /min
0-5300 bpm
2,8 J
SDS-plus
13 mm
26 mm
30 mm
/II
3,0 kg
3.0 dB(A)