LG 42LP870H Guía De Referencia Rápida página 14

14
ASSEMBLiNG ANd PREPARiNG
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center
or other furniture.
Attaching the Stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
cAuTiON
When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to
y
protect the screen from scratches.
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward
y
after being installed.)
Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.
y
NOTE
Make sure to hold the stand when attaching it to the TV to prevent the stand or TV from falling.
y
Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
y
1
Stand Body
Stand Base
3
2
4 EA
M4 x L20
Front
4 EA
M4 x L16
or
2 EA
2 EA
To secure the TV, Tighten the two Phillips screws
and the two Torx plus star head screws which are
provided.
Tighten the two Torx plus star head screws with a
star head driver bit, (not provided).