Publicidad
Idiomas disponibles
Idiomas disponibles
18
ASSEMBLiNG ANd PREPARiNG
cAuTiON
Disconnect the power before moving or installing
y
the TV. Otherwise electric shock may occur.
If you install the TV on a ceiling or slanted wall, it
y
may fall and result in severe injury.
Use an authorized LG wall mount and contact the
local dealer or qualified personnel.
Do not over tighten the screws as this may cause
y
damage to the TV and void your warranty.
Use the screws and wall mounts that meet the
y
VESA standard. Any damages or injuries by misuse
or using an improper accessory are not covered by
the warranty.
NOTE
The wall mount bracket is optional. You can obtain
y
additional accessories from your local dealer.
Use the screws that are listed in the VESA
y
standard screw specifications.
The wall mount kit includes an installation manual
y
and necessary parts.
The length of screws may differ depending on the
y
wall mount. Make sure to use the proper length.
For more information, refer to the manual supplied
y
with the wall mount.
External Speaker Out
Connect the external speaker.
1
(ARC)
RS-232C IN
(SERVICE & EXT_POWER)
RGB IN (PC)
AUX LAN
SPEAKER OUT
AUDIO IN
AV IN
LINE OUT
(RGB/DVI)
LAN
SERVICE ONLY TV-LINK CFG
OPTICAL AUDIO OUT
NOTE
Use only 8 ohm speakers.
y
Make sure that the external speaker should be
y
connected with TV under power-off state.
Use external speaker with SE type (3 pin).
y
/ DVI IN
2
/ DVI IN
3
RJP
ANTENNA/
CABLE IN
GAME CONTROL
/ M.P.I.
RESET
UPDATE
GND
L
R
GND
Tidying cables
1
Install the power cord holder and coaxial cable holder
to the back of the TV. It will help prevent the power
cable and coaxial cable from being removed by
accident.
2
Gather and bind the cables with the cable holder.
Power cord Holder
cable Holder
cAuTiON
Do not move the TV by holding the cable holder
y
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
coaxial cable Holder
Publicidad
