HSM HSM1275 Instrucciones De Servicio página 12

3
Machine components
1 2 3 4 5 6 7
1 Door
2 Paper feeding opening
3 Feed opening for disks and CDs
4 Safety instructions
5 LEDs
Paper shredder is ready for operation.
Cut material container full or door open
6 Rocker switch
: On
: Off, Reverse
7 Name plate
4 Scope of delivery
• Paper shredder, ready for connection, in
carton packing
• 5 Bags for shredded material
• Special cutting block oil 50 ml (cross cut)
• Operating instructions
Acces so ries
• 10 waste bags, order no. 1.330.995.100
• Special cutting block oil 250 ml
order No.: 1.235.997.403
See page 72 for our customer service ad-
dresses.
09/2011
5 Commissioning
• Open the door of the document shredder.
• Take the frame (A) and a waste bag.
HSM GmbH + Co. KG
Austrasse 1-9
88699 Frickingen / Germany
• Place the waste bag on the frame and
• Slide the frame (with bar B facing the
• Close the door of the document shredder.
• Plug the machine into a properly
Classic 125.2
english
fold over the top approx. 20 cm.
A
front of the cupboard) again into the
guide rails.
B
installed socket.
11