Regular Cleaning - Royal Catering RCEF 08E-EGO Manual De Instrucciones

OPERATION
1. Plug in the device.
2. Fill the tank with liquid oil, so that the oil level is between the two marks on the
side of the tank. Never use the device without oil!
3. Turn on the device. The ON/OFF knob lights up, the control light turns on.
4. Choose the temperature wished with the thermostat knob.
5. The heating element starts to heat and the temperature of the device raises little
by little.
6. As soon as the temperature wished is achieved, the orange light turns off. The
heating element stops to heat.
7. As soon as the temperature of the device decreases, the thermostat reacts to it:
the heating element restarts to heat and the orange light turns on.
8. After use, reset the thermostat on zero. When that is done, you can simply turn
off the device by switching the ON/OFF knob.
9. Generally speaking, it is advisable to unplug the device while not used.
10. When the device cooled down, take out the tank, the basket, the support grid
and the heating block, empty and clean them. This should be done after each use
to keep the device in perfect hygienic condition.
22
11. To clean the rest of the device, watch up to protect the electric parts from hu-
midity and from direct water contact to avoid electric shocks and shortcircuits.
An impregnated cloth is easily enough if you regularly clean the device.
12. If you don´t use the device for a longer time or stock it, check the humidity and
temperature conditions: the air has to be dry and the device should be covered
to be protected from dust deposits.

REGULAR CLEANING

Generalities
• The appliance must be cleaned at least once a day or if necessary more than
once.
• Scrupulously clean all the various components of the device, whether they come
in direct contact with the food product or not.
• Never clean the device with a pressurized water-jet, industrial cleaners, and bru-
shes or any other type of cleaning utensil that could damage the surface of the
appliance.
• Before cleaning you must remove the electricity supply plug isolating
the appliance from the main power circuit.
Procedure to follow to clean the device
To clean the main structure, simply use a damp cloth. Remember to frequently rinse.
The basket and its support should be brushed clean. Carefully clean the punched
holes. Make sure all the components are completely dry before remounting them.
REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If it should be the case,
please contact your customer service to solve the problem.
23