Eaton TRIPP LITE Serie Manual Del Propietário página 4

Front Panel
Power Button: Turn power ON and OFF.
1
Power LED: Indicates the unit is receiving power.
2
IR Receiver Head: Accepts IR signals from the remote
3
control.
HDMI Output A LEDs (for HDMI Out 1): Corresponding
4
number LED (In 1, In 2...) illuminates when HDMI source is
connected and chosen.
HDMI Output B LEDs (for HDMI Out 2): Corresponding
5
number LED (In 1, In 2...) illuminates when HDMI source is
connected and chosen.
Switch A: Press to switch between the connected HDMI
6
sources to be displayed on HDMI Out 1.
Switch B: Press to switch between the connected HDMI
7
sources to be displayed on HDMI Out 2.
Service Port: Micro-B USB port is reserved for firmware
8
updates.
4
1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8