Bosch BDS3210 Instrucciones De Montaje página 9

Fitting and removing the display
(1)
1
(10)
1
To fit the display (1), attach the display to the front edge of
the display mount in the direction of travel, on the snap-in
hook (10) ❶ and press the rear side of the display on the
display mount ❷.
To remove the display (1), pull the display (1) towards you
❶ until you are able to lift off the display (1) ❷.
Bosch eBike Systems
Inserting the removal blocker
2
(1)
2
Insert the removal blocker (8) into the adapter tray (2) from
below until you hear the removal blocker (8) click into place.
From this point onwards, you can no longer lift off the dis-
play (1) from the display fixture (9) without removing the
display mount from the adapter tray (2) by loosening the
two fastening screws (12).
Note: The removal blocker (8) is not an anti-theft device.
English – 3
(1)
(2)
(12)
(8)
M 275 007 3S1 | (12.04.2023)