Dräger Flame 1350 Instrucciones De Uso página 15

5.2 Maintenance procedure
1. Take the flame detector offline and inhibit any associated alarms.
2. Inspect the mounting arrangements, cables and glands and the enclosure.
Ensure that they are secure, correctly assembled and undamaged.
3. Clean the enclosure front cover window with a mild detergent solution and
soft cloth until it is free from all contamination. Thoroughly rinse the window
with clean water and dry with a lint-free cloth.
4. Test the flame detector using a flame simulator.
5. Reinstate the flame detector into service.
6 Storage
Store the product in its original packaging in a clean and dry place. Protect from
direct sunlight and heat.
7 Transport
Transport the product in its original packaging.
8 Disposal
This product must not be disposed of as household waste. This is indi-
cated by the adjacent symbol.
You can return this product to Dräger free of charge. For information
please contact the national marketing organizations or Dräger.
9 Technical data
Detector information
Model:
Type:
Spectral range:
Application:
Instructions for use |
Dräger Flame 1350
Multi-Spectrum UV/IR Flame Detector
Two wavelengths in the range of 0.3
to 0.18 µm and 4 to 5 µm
Flame/fire detection of hydrocarbon
fires only
Electrical specification
Supply voltage:
Supply ripple:
Power consumption with heater off:
Power consumption with heater on:
Shutdown voltage:
Mechanical specification
Device
Enclosure material:
Finish:
Weight:
Dimensions:
Cable entries:
Terminal wire size:
Ingress protection:
Mounting bracket
Support fixing:
Vertical adjustment range:
Horizontal adjustment range:
Environmental specification
Operation ambient temperature:
|
Storage
18 - 32 Vdc (24 Vdc nominal) includ-
ing ripple
1 Vpk - pk
3 W
12 W (24 Vdc nominal)
<18 Vdc
Aluminium alloy grade HE30
Stainless steel 316 (Copper & Magne-
sium free)
Powder-coated finish in Dräger blue
Aluminum: 2.5 kg (5.5 lb)
Stainless steel: 6 kg (12.1 lb)
220 mm x 100 mm (8.7 in x 3.9 in)
M25 or 3/4 " NPT (dual entries)
2
2.5 mm (14 AWG)
IP66 & IP67 (NEMA 4X &6P)
M8 (quantity 2)
0° - 45°
±45°
-60 °C to +85 °C (-76 °F to +185 °F)
en
15