Publicidad
Idiomas disponibles
Idiomas disponibles
9. Attach each Frame curtain to the window
sash using screws O (Type C). (See Fig. 6)
CAUTION:
DO NOT DRILL A HOLE IN THE
BOTTOM
PAN.
The unit is designed
to operate
with approximately
1/2" of water in
bottom pan.
10. Slide the unit into the cabinet. (See Fig. 7)
CAUTION:
For security purpose, reinstall
screws (Type A) at cabinet's
sides.
Type C O
Fig. 6
Screw (TypeA)
//Power
cord
/
Fig. 7
Screw (Type A)
11. Cut the foam-strip
® to the proper length
and insert between the upper window sash
and the lower window sash.
(See Fig. 8)
- Foam-Strip_)
Fig. 8
12. Attach the window locking bracket _) with
a type C screw. (See Fig. 9)
13. Attach the front grille to the cabinet by
inserting the tabs on the grille into the tabs
on the front of the cabinet.
Push the grille
in until it snaps into place. (See Fig.10)
NOTE: Please refer page 7 for setting the
ventilation
knob.
14. Lift the inlet grille and secure it with a type
A screw through
the front grille.
(See Fig. 11 )
15. Window installation of room air conditioner
is now completed. See ELECTRICAL DATA
for attaching power cord to electrical
outlet.
/
Window
locking bracket(_
Fig. 9
Fig. 10
\
Fig. 11
139
Publicidad
