HSM HSM1900 Instrucciones De Servicio página 11

WARNING
Dangerous mains voltage!
Improper handling of the machine
can lead to an electric shock.
– Before you insert the power plug, make
sure that the voltage and frequency of
your power supply comply with the infor-
mation on the name plate.
– Make sure that the power plug is easily
accessible.
– Make sure that no water gets into the
shredder. Do not immerse the power ca-
ble or the power plug in water.
– Never touch the power plug with wet
hands.
– Never pull the plug out of the socket us-
ing the power cable. Always pull out the
plug directly.
– Only use the machine in a dry room in-
doors. Never operate the machine in
damp rooms or in the rain.
Check the machine and cable
regularly for damage. Switch the
shredder off if it is damaged or
not working correctly or before
relocating or cleaning it and dis-
connect it from the mains.
– Keep the machine, the plug and cable
away from open fi re and hot surfaces.
The ventilation slots must not be blocked
or covered and there must be at least
5 cm space between the shredder and
any wall or furniture.
– Disable the machine when not in use:
disconnect the power plug from the mains
and cut the power cable.
Service work may only be carried
out by HSM Customer Service or
by the service technicians of our
contractual partners.
See page 76 for our customer
service addresses.
10
Notice
Only operate this machine in accordance
with the instructions outlined in "Proper
use".
Classic 90.2 • Primo 900
english
Danger from improper use
09/2011