Publicidad
Idiomas disponibles
Idiomas disponibles
8
English
Electromagnetic fields (EMF)
Radio Equipment Directive
-
To charge the battery, only use the USB wall adapter,
charging base and charging travel case provided with
the product: WAA1001, WAA2001, HX9200 or
HX9200/B, and TCC1001, TCC2001, TCC3001,
CBB1001 or CBB2001. Do not use an extension cord.
-
Charge, use and store the product at a temperature
between 0 °C and 40 °C.
-
Keep product and batteries away from fire and do not
expose them to direct sunlight or high temperatures.
-
If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than usual,
stop using and charging the product and contact
Philips.
-
Do not place products and their batteries in
microwave ovens or on induction cookers.
-
Do not open, modify, pierce, damage or dismantle the
product or battery to prevent batteries from heating
up or releasing toxic or hazardous substances. Do not
short-circuit, overcharge or reverse charge batteries.
-
If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately rinse
well with water and seek medical care.
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Hereby, Philips declares that electric toothbrushes
equipped with a radio frequency interface (Bluetooth or
BrushSync) are in compliance with Directive 2014/53/EU.
-
Bluetooth radio frequency: 2.4 GHz
-
Maximum Bluetooth radio frequency power: 3 dBm
-
NFC radio frequency: 13.56 MHz
-
Maximum NFC radio frequency power: 30.16 dBm
The full text of the EU declaration of conformity is
available at the following internet address:
www.philips.com/support
Publicidad
