Descargar Imprimir esta página

Ratio R-T750 Manual De Instrucciones página 26

Taladro eléctrico

Publicidad

Idiomas disponibles

Idiomas disponibles

TECHNICAL DATA
Type R-T750 (R-T-designation of machinery, representative of Impact Drill)
Rated voltage
Rated power
Rated no load speed
Impact rate
Chuck capacity max
Drilling capacity
Protection class
Weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K
& K
PA
WA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
Impact drilling into concrete:
Drilling into metal:
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used especially
what kind of workpiece is processed dependant on the following examples and other variations
on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
26
Steel
Masonry
Wood
Vibration emission value a
Uncertainty K = 1,5 m/s²
Vibration emission value a
Uncertainty K = 1,5 m/s²
= 6.66 m/s
2
h,ID
= 2.62 m/s
2
h,D
230 – 240 V ~ 50 Hz
750 W
0-3000 /min
0- 48000 /min
13 mm
13 mm
16 mm
30 mm
/II
1.81 kg
L
: 92 dB(A)
pA
L
: 103 dB(A)
wA
5.0 dB(A)

Publicidad

loading