Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
8. Installing the spray wand
•
Push the end of the spray wand (F) into the
trigger handle and rotate clockwise to secure.
•
Pull on the spray wand (F) to be certain it is
properly secured.
NOTE: Before installing the spray wand, you
should turn on the water, and then push the trigger
safety lock-out up on the gun and squeeze the
trigger to purge pump system of air and impurities.
WARNING
Make sure that the connection has no leakage.
9. Installing the spray tip
•
Pull back and hold the quick-connect collar on
the spray wand.
•
Insert the desired spray tip.
•
Release the quick-connect collar to lock the
spray tip in place.
NOTE: Tug on the spray tip to make sure it is
secured in place.
8
9
11
F
Publicidad
