Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
•
Liquid ejected from the battery may cause irritation or burns. (This advice is considered correct
for conventional NiMh, NiCd, lead acid and lithium-ion cell types. If this advice is incorrect for a
cell design that differs from these, then the correct advice may be substituted.)
•
Do not use a battery pack or product that is damaged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire explosion or risk of injury.
•
Do not expose a battery pack or product to fire or excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause fire explosion.
•
Follow all charging instructions and do not charge the battery pack or product outside of the
temperature range specified in the instructions. Charging improperly or at temperatures outside of
the specified range may damage the battery and increase the risk of fire.
•
Have servicing performed by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the product is maintained.
•
Do not modify or attempt to repair the product or the battery pack (as applicable) except as
indicated in the instructions for use and care.
THE RECOMMENDED AMBIENT TEMPERATURE RANGE:
ITEM
Product storage
Product operation
Battery charging
Charger operation
Battery storage
Battery discharging
WARNING(PROPOSITION 65)
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
•
Lead from lead-based paints;
•
Crystalline silica from bricks and cement and other masonry products;
•
Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending on how often you do this type of work. To
reduce your exposure to these chemicals, work in a well-ventilated area, and work with approved safety
equipment, such as dust masks that are specially designed to filter out microscopic particles.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly (not included): Phillips Screwdriver
TEMPERATURE
32˚F – 104˚F (0˚C – 40˚C)
32˚F – 104˚F (0˚C – 40˚C)
39˚F – 104˚F (4˚C – 40˚C)
32˚F – 104˚F (0˚C – 40˚C)
32˚F – 104˚F (0˚C – 40˚C)
32˚F – 113˚F (0˚C – 45˚C)
7
Publicidad
